Phone Provisioning General Setup

This article will provide a general walkthrough on provisioning phone devices for extensions in the 1Stream phone system.

Updated at November 1st, 2026

Pre-Provisioning Steps

Before attempting to provision the desired phone, ensure that you have factory reset the device, enabled MPP for the desired extension and set the firmware to the most up-to-date version. 

For a manufacturer specific experience, please refer to the following provisioning articles: 

Bring Your Own Device Best Practice

Our policy is if a device is end of life (i.e. 5 years after end of sale) it’s unlikely to work as the server Certificate Authority won’t be present.

 

Factory Reset

When factory reset, the device's firmware will be updated and the configuration file will be accessed, pulling the provisioning details from the phone system. This will apply regardless if the phone is new out of box or coming from elsewhere.

Unless the phone device is incompatible with the Managed Provisioning Portal, there will no need to log into the device and manually configure anything. 

Manually Provisioning Phones

Manual provisioning of the phone should not be required if you have successfully provisioned the desired phone using the instructions in the sections above. If you have phone device that is not compatible with the Managed Provisioning Portal, please refer to our Manual Provisioning General Setup.

Phone Still Not Provisioned?

If the phone has not provisioned with either sets of instructions, please refer to our Phone Provisioning Troubleshoot Guide.